The Christie MIRAGE WU12 is a 3D-DLP projector offering 12000 ANSI lumens, a contrast of 2000:1 and a resolution of WUXGA 1920 x 1200. The manufacturer rates the durability of the included lamp at 1000 hours. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Projector Calculator. A look at the light output reveals: The 12000 ANSI lumens are sufficient to illuminate an image width of up to 1113 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 742 cm. Should very large projection surfaces be required, the integrated edge-blending software offers the possibility to seamlessly combine images from multiple projectors without visible seams. In terms of video signals, the device processes resolutions up to Full HD 1080P. For convenient remote monitoring and administration, the projector is equipped with a classic RJ45 network socket. The projector was released in 2009 and is officially no longer distributed by Christie. Note: According to our information, replacement lamps (original or generic) are no longer available for this projector.
Display Type
3 x 0,95" DC3 DLP Chip WUXGA 16/9 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
12000
Screen
5333 Lux (200 cm Screen width)
Contrast
1500-2000:1 full on/off
1500-2000:1 full on/off
Black Level
8,0000 min. Lumen
3,561 min. Lumen
Offset
-
Resolution
WUXGA 1920 x 1200
2.304.000 Pixel QXGA 2048 x 1536 compressed
Full HD 1080P compatible Freeze Gamma correction Dynamic iris Warping Edge Blending Picture-in-Picture Password protection Remote control with laser pointer Control via web browser Lan network compatible.
Full HD 1080P compatible
Christie Website
Product Sheet english
