The IN1188HD model from InFocus combines DLP technology in the Standard-Portabel sector with 3000 ANSI lumens, a contrast of 150000:1 and a native HDTV 1920 x 1080 resolution. The LED unit of this model is rated for up to 30000 hours of runtime. With four hours of daily operation, this corresponds to a period of 20.5 years. A look at the light output reveals: The 3000 ANSI lumens are sufficient to illuminate an image width of up to 556 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 371 cm. In terms of video signals, the device processes resolutions up to Full HD 1080P as well as 3D, and also offers the technical capability for 360° projection. The projector was released in 2019 and is officially no longer distributed by InFocus.
Display Type
1 x 0,47" DLP Chip HDTV 16/9 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
3000
Screen
1333 Lux (200 cm Screen width)
Contrast
150000:1 full on/off
150000:1 full on/off
Black Level
0,0200 min. Lumen
0,009 min. Lumen
Offset
53% 3 cm over screen top edge →
SCREEN
+Projector
Resolution
HDTV 1920 x 1080
2.073.600 Pixel WUXGA 1920 x 1200 compressed
Standard-Portabel | External training and company presentations, as well as product presentations. Medium screen width or rooms with a little more ambient light, max. 200 lumens.
Light Source
LED 106W
Light Life
30000 h.
Operating Costs
0,00 € LED
Calculated brightness quality The screen width may also be larger. Perfect
240 cm (no Zoom)
Lux:
1333 Lux
Contrast:
150000:1
Candela pro m²:
425 cd/m²
Foot-Lamberts:
124 fL
60 cm
•
Focus
Manual
Zoom
No Zoom
Objective
F=1,7
Throw Ratio
1,2:1
Audio
1 x 3W
Connections
HDMI in
D-sub 15pin in
Cinch Video in
Mini Jack Audio in und out
USB in
hello, i got myself an infocus 1188 projector. and i set the zoom as i want, .... and everything is fine, .... but the next time i switch it ON, .... the wrong zoom is in again, ..... that‘s DOOF that i have to make the setting EVERY TIME and the projector can‘t remember it. HOW can i SAVE the zoom range, .... so that the correct setting is still there the next time i turn it ON?